FAUX SHIPLAP PEEL AND STICK WOOD PLANK WALL

SUPPLIES FOR FAUX SHIPLAP WOOD PLANK INSTALLATION

– Wood planks from Woody Walls – J-Roller – Saw- hand saw, jig saw or miter saw

SUPPLIES FOR FAUX SHIPLAP WOOD PLANK INSTALLATION

– Level – Marker – Ladder or step stool

TIPS FOR FAUX SHIPLAP WOOD PLANK INSTALLATION

– Make sure the surface of your wall is clean and perfectly dry. – Use a level to ensure the planks are level as you are working.

TIPS FOR FAUX SHIPLAP WOOD PLANK INSTALLATION

– Make a few lines on the wall as a guide to keep the planks level. – Peel the back off the panel and press it firmly to the wall.

DO YOU HAVE TO REMOVE BASEBOARDS TO INSTALL SHIPLAP?

Not necessarily. My bathroom had really bad, old baseboards at the bottom of the wall. I'm not even sure you could call them baseboards.

DO YOU HAVE TO REMOVE BASEBOARDS TO INSTALL SHIPLAP?

I was going to replace them anyways so I ripped them off the wall before I started.

DO YOU HAVE TO REMOVE BASEBOARDS TO INSTALL SHIPLAP?

When I measured my walls and planned my application I noticed that If I worked my way down the wall there would be about a 2.5 inch gap between the bottom of the wood panels and the floor.